Pharmaceutical Laboratory Equipment

Product Details:

Hot air ovens are electrical devices which use dry heat to sterilize. They were originally developed by Pasteur. Generally, they use a thermostat to control the temperature. Their double walled insulation keeps the heat in and conserves energy, the inner layer being a poor conductor and outer layer being metallic

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

These machines are used to fill empty soft or hard gelatin capsules of various sizes with powders, granules, semi-solids or liquids substances containing active pharmaceutical ingredients or a mixture of active drug substances and excipients. ...

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

We are engaged in offering a wide range of Capsule filling machines  to our clients. Our range of all products is widely appreciated.

Product Details:

We are engaged in offering a wide range of  Pharmacy equipment to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Standard double wall fabrication, Inner chamber made of richly anodized aluminium or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. Kanthal wire heating elements provided on three sides to attain quick and uniform heating in range of 50°C to 250°C ± 2°C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch selector switch of high or low rates of power thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase.
      Chamber size in mm/Inces        No. of          Capacity         Alum.          S.S.         
        H    W    D       (Approx)           Shelves        (Approx)      Chamber    Chamber
a)    300x300x300 (12"x12"x12")              2                 28 ltrs.          7300.00       9200.00
b)    350x350x350 (14"x14"x12")              2                 45 ltrs.          7800.00       9700.00
c)    400x400x400 (16"x16"x16")              2                 65 ltrs.          9400.00      11200.00
d)    450x450x450 (18"x18"x18")              2                 95 ltrs.        10400.00      12900.00
OPTIONAL
i)     Air circulating fan.
ii)    Timer 0-24 hours.
iii)   Imported Thermostat "EGO"/" JUMO"German, Accuracy of ± 1°C.
iv)   Digital temp. indicator-cum-Controller.
v)    Microprocessor PID digital temp. Indicator-cum-controller.

Product Details:

Double wall construction. Inner chamber made of highly polished stainless steel sheet & the outer is Made of mild steel duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. Temperature range 50° C to 250° C is controlled by a Imported "EGO" "JUMO" German thermostat.
Chamber size in mm & inches Approx.       L x W x H   
a)       250x250x250mm                           (10"x10"x10")                     13000.00
b)       300x300x250mm                           (12"x12"x10")                     15000.00
c)       350x350x250mm                           (14"x14"x10")                     18000.00
OPTIONAL: i)  Digital temp. Indicator-cum-controller.                            6000.00
               ii)  Microprocessor PID digital temp. Indicator-cum-controller. 11000.00

Product Details:

Temperature range 5°C above from ambient temperature to 80°C. Thermostatic control with accuracy of ± 0.5° C to 1 °C. Double walled, inside stainless steel and outside mild steel painted in epoxy powder coating. Bath consists of two pilot lamps. Temperature control knob and on/off switch. To work on 220/230 volts A.C. Supplied with or without stirring arrangment, without stirring arrangment, without racks and thermometer. Lid of water bath is made of stainless steel sheet
Size inside chamber (Stainless) L x W x H     Capacity (Approx.)
a)    300 x 175 x 175      (suitable for 1 racks)                 12 ltrs.                4800.00
b)    300 x 250 x 175      (suitable for 1 racks)                 14 ltrs.                5800.00
c)    375 x 300 x 175      (suitable for 1 racks)                 18 ltrs.                7000.00        
d)    455 x 300 x 175      (suitable for 1 racks)                 25 ltrs.                8500.00
e)    605 x 300 x 175      (suitable for 1 racks)                 32 ltrs.              10400.00      
OPTIONAL
i)   L-shaped thermometer (fitted with water bath).                                                 800
ii)  Imported Thermostat "EGO"/"JUMO" German with an Accuracy of ± 0.5°C.         1200
iii) Digital temp. Indicator-cum-controller.                                                             6000
iv) Microprocesser PID digital temp. Indicator-cum-controller.                               11000
v) Stirrer with 1/20 H.P High speed motor with stainless steel stirring rod & blade.    2200

Additional Information:

• Production Capacity: 500
• Delivery Time: 1 month
• Packaging Details: Foam Packing /Thermocol and cardbox.

Product Details:

Actophotometer is used for the measurement of locomotor activity. It is a box of square size equipped with photoelectric cells, which are connected in circuits with a counter, Its number may be different in a different instrument

Additional Information:

• Delivery Time: 2 DAY

Product Details:

Made of S.S. Sheet. Top of the bath and concentric rings are of stainless steel. Heating elements have an automatic cut off device when the gets dry. Electrically operated on 220/230 volts A.C                                                                           Size inside (stainless steel) (Thermostatic Control)               Capacity (Approx.)
a)     300 x 250 x 100mm                         6 holes of 75 mm dia.              8 ltrs.                    
b)     355 x 405 x 100mm                       12 holes of 75 mm dia.             15 ltrs.                    

Product Details:

To meet the variegated specifications of our renowned clients, we are engaged in manufacturing, exporting and supplying a wide range of Soxhlet Apparatus.

Uses:

• Used for liquid-solid extractions.

Features:

• Easy to use
• Sturdy design
• Fine finish

Product Details:

We are engaged in offering a wide range of xxxxxxxxx to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Wall hanging casted auminium vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging arrangment is provided. The condenser is seamless. Fitted with automatic ejection device which operates automatically when water vessel gets dried. The baffle cup and condensor are made out of thick stainless steel sheet.

Product Details:

For determination of melting points up to 350° C. The mounted block is illuminated from below by a lamp fixed in its housing. The aluminium block accepts three capillary tubes and mercury thermometer. the temperature is ragulated by energy regulator fitted to the unit. The lamp provides uniform and shadow less light, regulator fitted to the unit. Supplied without capillary tubes and thermometer.

Product Details:

Fitted with pressure gauge upto 20 psi. the unit has spring-loaded safety valve for pressure adjustment and a dead weight safety valve . Supplied with electric fittings, cord and plug to work on 220/230 volts A.C. supply. Supplied complete with tripod stand.

Dia x height in mm Alumininum S.Steel
a) 300 x 300 mm (seamless) 6500.00 8400.00
b) 300 x 375 mm (jointed) 7800.00 9500.00

Additional Information:

• Delivery Time: 1 week

Product Details:

Histamine Chamber A compact Histamine Aerosol apparatus consisting of a clear perspex exposition chamber divided in two sections an all glass neutralizer and dial type spectrophotometer for assay of anti-histamines drug on guinea-pigs etc.

Additional Information:

• Delivery Time: 2 Days

Product Details:

Inside made of stainless steel.Temperatre range is above ambient 5°C to 90°C. The chamber Air circulating fan to ensure uniformity of temp. A carrier to hold bottles (6 number of 60 mm DIA x 200 mm Depth) can be easly placed on front of rotator mechanism. Any bottle can be taken out eassily from the carrier. The carrier rotates with bottles parallel to the door at a variable speed . Viewing glass window in the specimen inside the chamber. Complete with microprocesser PID digital temp. Indicator-cum-controller with Pt 100 sensor.

Product Details:

The Suppository Mold is a device to produce suppositories that are specially designed to heal hemorrhoids and anal fissures more efficiently than regular suppositories.

Additional Information:

• Delivery Time: 2 days

Product Details:

We are the leading organizations engaged in manufacturing, exporting and supplying to our clients excellent quality Fume Hood.

Uses:

• Used to protect lab environment and operator during general chemical applications.

Features:

• Perfect finish
• Highly durable
• Sturdiness

Additional Information:

• Delivery Time: 1 WEEK

Product Details:

It used for Sterilizations under Saturated steam pressure at any selected point between 10 to 20 p.s.i. (adjustable). These are double walled units with inner chamber (boiler) made of 18 S.W.G. stainless steel fitted with neoprene rubber gasket. All autoclave are fitted with standard accessories such as pressure gauge, steam release cock, spring loaded safety valve, water drain valve and heating element. Supplied complete with cord and plug to work on 220/230 volts A.C. Supply
ECONOMY
Chamber size in mm & Load Capacity Inner S.S. Inner S.S. Redial Locking
Dia x Depth (Approx) Outer M.S. Outer S.S. lining System

Product Details:

A logic gate is a device that acts as a building block for digital circuits. They perform basic logical functions that are fundamental to digital circuits. Most electronic devices we use today will have some form of logic gates in them.

Additional Information:

• Delivery Time: 1 Week

Product Details:

Standard double wall fabrication. inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel/power coated paint with mat finished colour combinations. Double wall door with double glass window for observation in the chamber. Temprature range 5° C above ambient to 80° C +- 1° C controlled by a thermostat. The equipment is workable on 220 V Ac 50Hz single phase.
      Chamber size in mm/Inches    No.Of          Capacity               Alum.             S.S
            H x D x W                           Shelves       (Approx.)           Chamber      Chamber
_{a)     300x300x300 (12"x12"x12")                   2                      28 ltrs.                      7800.00              9800.00
b)     350x350x350 (14"x14"x14")                   2                      65 ltrs.                     10200.00             12800.00
d)     450x450x450 (18"x18"x18")                   2                      95 ltrs.                     11000.00             14000.00
e)     600x450x450 (24"x24"x24")                   2                      125 ltrs.                   16900.00             21000.00}
f)    600x600x600 (24x"24"x24")             2                254 ltrs.              20000.00         25000.00

Product Details:

A handy tough and direct dial reading type tablet hardness tester working as pair of plairs generates breaking force in single grip. This tablet hardness tester offers accurate and reproducible results much faster other conventional hardness testers.

Additional Information:

• Delivery Time: 2 DAYS

Product Details:

Most suitable to measure the diameter of the inhibited zone in microbiology, Botany, Zoology, Bacteriology & Pathology Labs. Unique in design & suitable for measuring the diameter of inhibited zone within the range of 0 to 35 mm with accuracy 0.2mm

Additional Information:

• Item Code: 22
• Production Capacity: 50
• Delivery Time: 15 Days
• Packaging Details: Corrugated box

Product Details:

Double wall round construction. Inner chamber Stainless Steel/black anodized aluminium and outer made out of mild steel painted in epoxy powder coating. Thermostatic control. Temp. range 5° C above ambient to 80° C ± 1° C. Complete with indicators. wire & plug. To work on 220 V. A.C. without Thermometer.
DIA & DEPTH
a) 200mm x 75mm 5200.00
b) 250mm x 125mm 5700.00

Product Details:

Temperaturerange from ambient temperature to 98° C. Thermostatic control with an accuracy of ± 1°C. Double walled, inside stainless steel and outside mild steel sheet painted in epoxy powder coating. Top of the beath and concentric rings of stainless steel. To work on 220/230 volts A.C.
Size inside (Stainless steel) L x W x H Capacity (Approx.)
a) 300x250x100mm 6 holes of 75mm dia. 8 ltrs. 5600.00
b) 355x405x100mm 12 holes of 75mm dia. 15 ltrs. 8400.00
OPTIONAL
i) Imported Thermostat "EGO" German, Accuracy ± 0.5° C. 1200.00
ii) Digital temp. Indicator-cum-Controller. 6000.00

Additional Information:

• Item Code: 131
• Production Capacity: 50
• Delivery Time: 1 week

Product Details:

Standard Construction, inner cahmber made out of thick, highly polished stainless steel sheet. Temperature range 5°C to 50° C and controlled by a digital temp. indicator-cum-controller accuracy of ± 1° C. fitted with FHP pump for circulating the cold liquid to the external equipment.
           Chamber size L x W x H      Capacity (Approx.)
              500x250x250mm                    32 ltrs.                                   80000.00
OPTIONAL: Microprocessor PID digital temp. Indicator-cum-controller.     11000.00

Product Details:

Satndard Construction, inner chamber made out of stainless steel sheet with digital temp. controller-cum-indicator. Temperature can be controlled from range minus (-) 20° C to plus (+) 40° C.
             Chamber size L x W x H         Capacity (Approx.)
              450x300x300                            42 ltrs.                                    90000.00
OPTIONAL: Microprocessor PID digital temp. Indicator-cum-conteoller            11000.00

Product Details:

Temperature range from room temperature to 95° C. Thermostat control with an accuracy of ± 1° c. Double walled, inside made of stainless steel and outside mild steel sheet, painted in epoxy powder coating. Oscillating tray is riding on ball rollers. Shaking speed range 40 to 140 r.p.m. Shaking tray can hold either test or flask of 25ml, 50ml 100ml. To work on 220/230 volts A.C. without R.P.M. Indicator.
        Shaking Tray Size (Stainless steel)                      Capacity (Approx.)
a)     275x275x150mm                                                     12 ltrs.                                  34000.00
b)     405x300x150mm                                                     18 ltrs.                                  38000.00
OPTIONAL
i)      L-shaped thermometer (fitted with water bath).                                                         800.00
ii)     Imported Thermostat "EGO"/"JUMO" German with an Accuracy of ± 0.5°C.                      1200.00
iii)    Digital temp. Indicator-cum-controller.                                                                     6000.00
iv)    Microprocessor PID digital temp. Indicator-cum-controller.                                         11000.00
v)    Shaking tray for 50ml, 100ml, 250ml, 500ml, 25ml dia. Test tubes or conical flasks.           2000.00

Product Details:

An alternative to traditional methods of sterilizing, once switched 'ON' the units are ready to use within 30 minuts and ensure total destruction of all micro-organism within seconds. Preset temp. of 230°-250° C, incorporated with a thrmostat with an accuracy of ± 1-2°C of the preset range. These are compact enough to be placed on any Laminar Air Flow Bench or any other work side tables in a clean room. To work on 220 volts A.C.
a)         Crucible size: 2" Dia x 2" Depth.                                           7600.00
b)         Crucible size: 2" Dia x 2" Depth.                                           8600.00

Product Details:

This Block is comprised of an outer case with heater and thermostat, fitted with aluminium blocks drilled to accept test tubes of 25mm dia. Temperature control by means of thermostat. Outside painted in epoxy powder coating. Outer case is insulated and ventileted.
Temprature range 90° C. to 300° C. The chamber has 40 holes to accept 25mm dia. test tubes.
OPTIONAL: i)   Digital Temp controller-cum-indicator.                                                   6000.00
ii)     The above chamber with 40 holes to accept 13 and 19mm test tubes

Product Details:

The screw gauge is an instrument used for measuring exactly the diameter of a thin wire or the width of a sheet of metal. It comprises of a U-shaped mount which is fixed with a screwed pin which is fixed to a thimble. Side by side to the axis of the thimble, a scale passed in mm is inscribed.

Additional Information:

• Delivery Time: 2 DAYS

Product Details:

Most useful sterlizing the loaded material under a steam pressure of 10 to 20 p.s.i. (adjustable). It has inner chamber, stam jacket & outer wall made of M.S/S.S. duly argon arc welded. The space between outer wall & steam jacket is field with high grade glass wool to minimize the temperature loss. The lid is made of thick Stainless steel & closed by redial type closing arrangment with pedal lifting device. fitted with a gasket made up of neoprene rubber, safety valve, water level indicator, steam release valve, pressure gauge & S.S. basket. Triple walled with inner chamber, jacket made outer made outer wall & of S.S./M.S. with Redial Locking System
Dia x Depth Load Capacity Outer M.S. Outer S.S.
a) 300x500mm 3KW 40 ltrs. 78200 92400

b) 350x550mm 4KW 50 ltrs. 82500 112000

c) 400x600mm 5KW 78 ltrs. 92000 130000

d) 450x600mm 5KW 98 ltrs. 106000 155000

e) 550x750mm 6KW 158 ltrs. 130000 190000